Cable Marking Gost, dikodi mai zane-zane da kuma

na USB alama - shi ne da amfani da membranes na launi daban-daban, da ake ji tasirin, da yin amfani da tasirin da kuma tags, kazalika da lantarki saka alama. The alama ya nuna USB halaye da kuma damar ware shi daga sauran irin kayayyakin.

Mene ne fitattun abubuwa na wayoyi?

Sa alama ikon igiyoyi kunshi da haruffa a samansu da kayan daga abin da harsashi, rufi, shugaba, da kuma irin kariya. Alamun da wani babban ƙarfin lantarki igiyoyi sun hada da zane fasali.

Copper wayoyi a cikin rubutu ba alama ta musamman wasika. Yawanci, da aluminum shugaba - shi ne harafin "A", wanda tsaye a farkon lamarin. To, akwai wata wasika da cewa ƙayyade rufi abu. Polyethylene rufi - harafin "P", PVC nuna harafin "B", da kuma roba hatimi ne kaddamarda da harafin "P". Wadannan ne wata wasika da ke nuna da irin dakile, wato da harafin "A" - aluminum, harafin "C" - gubar, da harafin "P" - PE tiyo, harafin "B" - wani harsashi na polyvinyl chloride, roba harsashi - harafin "P" . Recent haruffa tsaya cover irin.

Alal misali, da sunan "SG" ne mai jan waya, takarda rufi, gubar daina kai hare hare, babu m inuwõyi. Mai-cika na USB alama qunshi wata wasika "M" (gas matsa lamba - harafin "G") da kuma harafin nuna muhimmancin karfin man halayyar da related fasali. Alal misali, "MHC" USB - shi ne mai-cika na USB, low matsa lamba, da kuma gubar cladding, wanda yana da wani m murfin.

Sa alama na wayoyi da igiyoyi ne da za'ayi da lambobi da kuma haruffa a jihar matsayin da bayani dalla-dalla: Gost 16442-80 da TU16.71-277-98.

Sa alama Power igiyoyi tare da roba da kuma PVC rufi

• "A" - yana nufin da zuciyar abu, aluminum. Idan haruffa ne ba, jan ne abu.
• "AS" - ya rayu tare da wani aluminum na USB daina kai hare hare ne da ake yi da gubar.
• "AA" - ya rayu tare da wani aluminum na USB daina kai hare hare ne da ake yi na aluminum.
• "B" - ya ce cewa na USB yana da makamai, an yi shi da biyu yadudduka na tef tare da wani musamman lalata resistant shafi.
• "BN" - akwai wani musamman m shafi cewa ba ya goyon bayan konewa.
• "B" - shi ne ko dai da farko ko na biyu na nufin "PVC jacket".
• "G" - tsirara, ba tare da wani m shafi na USB idan "G" shi ne a karshen. Idan "G" ne a farkon, shi ne a yi amfani da karafa masana'antu.
• "2D" - ƙarin alumopolymer tef.
• "SW" - akwai wani m daina kai hare hare, wanda ya yi kama da PVC tiyo (extruded).
• "Lim" - da tiyo an sanya na polyethylene.
• "NLS" - polyethylene kai-extinguishing.
• "K" - idan harafi ne a farkon lamarin, da iko na USB. Idan a karshen, da makamai da aka yi da karfe wayoyi, wanda suke sawa murfin.
• "KG" - wani m na USB.
• "C" - suturta wani gubar daina kai hare hare na USB.
• "Ya" - harsashi da aka sanya a kan saman duk na USB bulan.
• "PV" - kunshi wani vulcanized polyethylene.
• "P" - da na USB rufi da aka sanya daga roba.
• "HP" - da na USB rufi bai ƙone ba.
• "Ng" - yawanci daraja a karshen yana nufin cewa na USB bai ƙone ba.

The rubutu a kan samfurin BPI

na USB alama BPI Gost 18410-73 (takardar impregnated na USB rufi):

• "A" - rayu aluminum.
• "B" - makamai da aka wakilta bakin ciki karfe tube.
• "AB" - aluminum makamai.
• "SB" - makamai gubar.
• "C" - gubar - harsashi abu.
• "Ya" - rayu baya, gubar.
• "P" - makamai sanya daga galvanized karfe lebur wayoyi.
• "K" - makamai da aka sanya na galvanized karfe zagaye wayoyi.
• "B" - takarda rufi, wanda yana da wani tsautsayi impregnation.
• "B" - babu matasan kai.
• "L" - akwai wani matashin kai, kuma ya hada da lavsanovaja tef.
• "2n" - ya hada da wani biyu tef.
• "G" - da m cover ba yanzu.
• "N" - external cover ba combustible. Sanya bayan da ajiyar.
• "SW" - cover kunshi extruded tiyo, kunsha na polyvinyl chloride.
• "Lim" - cover kunshi extruded tiyo, kunsha na polyethylene.
• "Shvpg" - da polyvinyl chloride rage flammability.
• "Jiran aiki" - single-waya conductors. Sanya a karshen.
• "U" - takarda rufi, wanda ya karu da dumama da zazzabi.
• "C" - takarda rufi, wanda tare da wani da ba.

matukin jirgi na USB

Cable Marking iko:

• "A" - rayu aluminum ko jan karfe, idan ba aluminum shugaba.
• "B" - (na biyu) rufi PVC.
• "B" - (na uku) PVC daina kai hare hare.
• "U" - polyethylene rufi.
• "Ps" - retardant polyethylene rufi.
• "G" - da m cover ne mãsu fakowa ba.
• "P" - roba rufi.
• "K" - (na biyu ko na farko da wasika) da iko na USB.
• "KG" - wani m na USB.
• "F" - Ptfe rufi.
• "E" - idan a farkon, shi ne wani lantarki na USB alama wanda ya ce shi ne ya dace domin al'ada yanayi, da kuma idan a karshen ko a tsakiyar, sa'an nan - a kare na USB, wanda aka yi amfani don kare da electromagnetic radiation.

Amfani da haruffa a hade tare da lambobi

Har ila yau akwai wani alpha-Tazarar na USB alama. kwafi:

• AVVGng 3x4 - uku-waya na USB, aluminum. Tare da 4 square sashe. A casing da kuma rufi kunshi polyvinylchloride, wani m murfin ba yanzu, shi ba ya goyon bayan konewa.
• PVG 3x2.5 - uku-core igiyoyi, da tagulla. Tare da wani square giciye sashe 2.5. Akwai polyethylene rufi. The m harsashi da aka sanya na PVC, da m cover ba yanzu.
• Asb 7x2.5 - bakwai-pin keyed na USB, aluminum. Sashen C - 2.5 square. A harsashi da aka yi da gubar, akwai makamai.

Wannan shi ne, irin wannan lakabin nuna giciye sashe da kuma lambar.

Deciphering musamman abbreviations

Sa alama na wayoyi da igiyoyi, wanda da mai kwazo acronym:

• KSPV - igiyoyi ake nufi don na musamman watsa tsarin a cikin kwasfa.
• KPSVV - igiyoyi aka yi nufi ga wuta ƙararrawa.
• KPSVEV - igiyoyi aka yi nufi ga wuta ƙararrawa, amma da suka hada da allon.
• PNSV - dumama na USB da karfe core.
• MF-1, MF-3 - waya tare da rufi roba. A sassauci daga jijiyoyinmu - 1.3 aji.
• PVA - waya da ciwon roba harsashi (connector).
• SHVVP - igiyar makaran roba (lebur).
• SPAP - waya lebur duniya.
• PUGNP - waya m lebur duniya.

Ba kamar kayayyakin daga juna ta wani daban-daban launi makirci

Muna bukatar mu rarrabe tsakanin su ga dace na amfani da igiyoyi. Don yin wannan sauki, akwai wani launi na USB alama.

Domin ganewa na igiyoyi amfani da launin ruwan kasa, baki, ja, yellow, orange, kore, da shunayya da launi. Kuma blue, da fari, da launin toka, sa turkos, da ruwan hoda. Wannan jerin aka kafa ta hanyar bayyana matsayin.

Blue waya ne aka yi nufi ga matsakaici ko tsaka tsaki shugaba.

Suna iya amfani da daban-daban haduwa da launuka. Green da kuma rawaya launi ba za a iya amfani da su a sauran haduwa fiye da hade da rawaya da kore, da kuma shi ake amfani da su nuna a fakaice a m tsaka tsaki shugaba.

Idan m duniya a hade tare da tsaka tsaki shugaba - nuna ko dai dukan tsawon na yellow-kore hade, da kuma a iyakar haske blue ko shudin bisa dukan tsawon kuma a iyakar da hade da rawaya da kore.

Misalan ganewa na tsakiya:

1. Color ganewa na conductors, wanda ake makaran PVC fili:

- uku-waya na USB: black, blue, da launin ruwan kasa, ko a hade da rawaya da kore, baki, blue.

- hudu-core na USB: A hade da rawaya da kore (m ƙasa shugaba), baki, blue, da launin ruwan kasa.

2. Color ganewa zama ma ga uku guda-core igiyoyi, fentin baki:

- wani na USB da ciwon blue lakabin;

- guda na USB ba tare da wani lakabin ko lakabin black.

- wani na USB da ciwon ruwan kasa launi lakabin.

3. Color ganewa na aikin muhimmanci sarƙoƙi:

- for conductors da ciwon da ikon haihuwarka, shi ne baki.

- for conductors, da ciwon da ikon kewaye, ƙararrawa kuma aunawa halin yanzu wanda shi ne m, shi ne ja.

- for conductors, da ciwon da ikon kewaye yi sigina da kuma DC ji ne blue.

- for m conductors na sifili - mai hade da rawaya da kore.

- for conductors cewa suna da alaka da tsaka tsaki shugaba da kuma ba su yi nufi ga duniya - shi ne blue.

A tags amfani da su Label

Tags for sa alama na USB da ake amfani da alamar iko da ikon wayoyi. Suna Ya sanya daga propylene.

Idan akwai suna boye wayoyi igiyoyi ko bututu a cikin ganuwar, sa alama tags suna a haɗe zuwa na USB kanti da mashiga, a rijiyoyin da najasa bẽnãye toshe da kuma maha? Ar akwatin. A cikin hali na USB da kwatance lakabin tags kafa a kowane akwati, ko coupler, kuma a karshen. Domin shigar da USB a rigar yankunan, tasirin an sanya roba.

Tags ne:

- Cable Marking U-134;

- Cable Marking U-153;

- Cable Marking U-135;

- Cable Marking U-136.

Majalisar

Saboda haka, kamar yadda za ka iya gani daga labarin, sa alama waya da kuma na USB (af, Gost, shi ne wani abu da cewa dole ne da farko kula da mabukaci a saya) sosai bambance bambancen. Kuma da talakawan mutum ba zai zama da sauki warware wannan. Saboda haka za mu bayar da shawara ga aiki tare da igiyoyi, da wayoyi don kyautata da masu sana'a taimako. Zai yi kyau idan a cikin sabis na master za su hada da ba wai kawai da zama dole aiki, amma kuma da sayan dole abu, domin ku aikata ba rikici har. Idan ka shawarta zaka kai-yi wani aikin dangantaka da igiyoyi, da wayoyi, shi wajibi ne don so ku sa'a a cikin wannan da wuya al'amarin!