An halicci dragon daga beads: tsarin zane

Macijin ba kawai dabi'ar kirki ba ce da alama ta Gabas, amma har ma da zane mai ban sha'awa. Zai iya zama kyauta ga kowane hutu, abu mai amfani (alal misali, keychain) ko kawai don faranta ido a matsayin abu mai ciki. Muna ba da shawara ka koyi daga ɗalibai masu bi na gaba yadda za a yi dutsen dragon.

Me ake bukata don aiki?

Aikace-aikacen kayan aiki masu kayan aiki da kayan kayan aiki don sayen ɗakun kananan dodanni sune:

1. Beads (yawan adadin ya danganta da girman nau'o'in sana'a na gaba, da launuka - akan tunaninka);
2. Kashi biyu na launin baki (don ido);
3. Yankin kifi ko waya na musamman (tsawon kuma yana dogara ne da girman nau'in figurine);
4. Scissors.

Ƙananan dodon

Irin waɗannan ƙananan dodon daga ƙera da waya za a iya amfani da su azaman mabudin alamar, alamar shafi, magnet, goge, dakatar da sauransu. Ya isa kawai don haša sarkar, lakabi, fil, magnet ko wani abin da aka sanya a cikin aikin gama.

Kuna buƙatar daga 90 zuwa 120 centimeters na bakin ciki waya, ɗari biyu na beads, a kalla biyu launi daban-daban, da kuma almakashi.

Makircin aikin

Jagoran Jagora - dragon daga beads (makircin zane yana haɗe).

1. Tana katako guda biyu a kan waya kuma sanya su a tsakiyar (a cikin makirci, zance A).
2. Tana katako guda biyu a gefe guda na waya.
3. Ka wuce ta biyu ƙirar ɗayan a gefe na waya (a cikin makircin batu na B).
4. Tana waya. Kuna da layukan layuka guda biyu (misalin C).
5. Tana katako guda uku a cikin hanyar da ta biyo baya (Figure D).
6. Yi jeri na hudu na ƙira biyar, kamar yadda a cikin misali E. A lokaci guda, a gefuna kuma a tsakiyar, amfani da ƙananan nau'in launi na farko, da kuma tsakanin su - launi na idanu.
7. Ci gaba a cikin hanya guda zuwa layi madaidaiciya tare da adadin beads masu zuwa: biyar, uku, uku, uku, hudu (Figure F).
8. Sanya ƙugiyoyi bakwai a ɗaya daga cikin wayoyi kuma a zana ta ta cikin hudu na farko (misali G).
9. Gyara waya (zane H).
10. Yi maimaita mataki na takwas akan sauran waya (Figure I).
11. Ƙarfafa wasu layuka na beads a cikin irin wannan: hudu, biyar, shida, biyar, hudu.
12. Yi takalma, kamar yadda a cikin maki daga takwas zuwa goma.
13. Sanya wasu layuka takwas na beads a irin wannan: hudu, uku, uku, biyu, biyu, daya, daya (zane na J).

Dragon daga beads yana shirye!

Dragon tare da fuka-fuki

Don yin dragon mai tashi, ya isa kawai don kammala fuka-fuki a kan sauran waya kuma ya haɗa shi zuwa jikin jiki (alal misali, wanda aka bayyana a sama).

Hanyoyin aiki a kan satar fuka-fukin dragon (daya daga cikin zaɓuɓɓuka):

1. Sanya wani ƙugiya a kan waya (Figure 1).
2. Sanya igiya huɗu daga wani ƙarshen waya kuma ka shiga ta gefe ɗaya (Figure 2).
3. Maimaita magana guda biyu, amma yanzu layi guda bakwai (zaka iya canza launuka) (Figure 3).
4. Yi jeri na iri goma a daidai wannan hanya kamar yadda na baya (Figure 4).
5. Saka wani jeri na takaddun katako guda goma sha huɗu, kamar yadda a cikin Figure 5.
6. Yanzu tafi da dama na waya ta hanyar jere na hudu (inda kake da nau'i goma) kamar haka: ana saka waya a cikin ƙira na farko na jere na huɗu kuma yana fitowa ta hanyar na biyu a jere na biyar, sa'an nan kuma ya sake dawowa zuwa na uku. Bayan haka, ana gudanar da layi a cikin jere kuma a sake fitowa ta biyar ta hanyar biyar na biyar kuma ya koma na shida. An sake maimaita tarkon tare da na takwas da tara. Ƙarin bayani ana nuna su a Figure 6.
7. Hakazalika, kana buƙatar riƙe gefen hagu na waya, kawai a jere na biyar zai wuce ta lamba biyar da tara (Figure 6).
8. Yanzu gefen hagu da dama na waya dole ne ta wuce ta jeri na uku na beads, ta wucewa tare da takaddun fata daga na huɗu. Ga gefen hagu, waɗannan su ne ƙidaya da huɗu da bakwai, kuma a gefen hagu - daya, hudu, bakwai, goma (Figure 7).
9. Hakazalika, kamar yadda a cikin sakin layi na baya, duka iyakokin waya sun wuce ta jere na biyu, "jingina" zuwa kowane ƙira na biyu daga jere na uku (Figures 8 da 9).
10. Bayan wannan, ɗaya daga cikin iyakar waya an gudanar da shi a farkon ƙugiya.
11. Karin matakan zigzag suna wucewa ta cikin dukan beads daga jere na sama.
12. Bayan haka an yi amfani da wani ƙugiya, kuma an sake mayar da waya (Figure 10).
13. Bugu da ari, an sake maimaita maki 11 da 15, kawai ƙofar waya an kusantar ta cikin ƙofar na biyu daga jere na biyu (Figure 11).
14. Sauran ƙarshen waya kuma ana ɗauka ta hanyar ƙwaƙwalwar farko kuma ta sa zigzag "matakai", ta hanyar jerin da ba a yi amfani da shi ba a sakin layi na baya (Figure 12). An ƙera wani ƙwaƙwalwar ƙira.
15. Ƙara a tsakiyar wani ƙananan ƙira (Figure 13).
16. Duka iyakar waya zuwa ciki (zane na 14).
17. Ka wuce iyakar waya ta cikin dukkan layuka, kamar yadda aka nuna a Figure 15.
18. Ƙara ƙaramin ƙananan ƙira zuwa alamar reshe (Figure 16).

Wata reshe yana shirye! Yi wani abu don yin ma'aurata.

Mun haɗa fuka-fuka ga jiki

Idan ka yi komai daidai, to, sakamakon haka, iyakar waya zata kasance a gefe daya. Cire su daga mummunan beads, kamar yadda a hoto na farko. Haɗa reshe tare da jikin na dragon, kamar yadda a cikin cikakken zane a kasa.

Tie knots a iyakar waya.

Anan kuma dragon mai tashi daga beads yana shirye! Domin farawa wannan aikin ba zai zama da wahala ba. Kuma duk godiya ga cikakken tsari.

Flat dragon

Yin zane na dragon daga beads ba dole ba ne ya hada da bada shi wasu kundin. Ana iya yin lebur, alal misali, azaman hoto. Don yin wannan, akwai buƙatar ka samu a cikin mujalloli na musamman ko Intanit da makircin. Wannan ba dole ba ne ya zama zane-zane na zane-zane, mai dacewa don yin sulhu tare da zaren.

Mahimmin aikin:

1. Sa a gabanku wani ganye tare da zane.
2. Fara faraɗa a gefen gefe ko tare da wanda inda ƙuƙwalwar take da ita, idan ba a yi hoto ba, amma adadi.
3. Juye a jere daya.
4. Kowane sabon jerin an haɗa shi da baya a daya daga cikin hanyoyi:

• Zigzag stitches, idan an yi amfani da ƙarshen waya;
• Idan kayi ƙare biyu, to sai ka buga jerin a gefen ɗaya kuma ka wuce ta cikin wasu (daidai yadda aka bayyana a cikin aji na farko).

Tip: Idan dragon dinka yana da abubuwa masu yawa, to sai ku sa su a wata waya kuma ku sa su a wurare masu kyau.

Dragon mai tsabta daga beads (makirci a haɗe)

Irin wannan labarin ba zai iya zama ba kawai a matsayin mai amfani ba, amma an dakatar da shi. Bugu da ƙari za ku buƙaci babban ƙwaƙwalwar ƙwaƙwalwa ko kyan gani.

Jagoran Jagora - dragon daga beads (makircin zane yana haɗe).

1. Saka wata waya mai haske ko ƙananan itace a cikin babban ƙatu.
2. Kunsa rabin rabin ball kusa da beads (Figure 1). Tsayar da iyakar waya zuwa tsakiyar sanda.
3. Ƙara wasu layuka na beads zuwa jere na farko a daya gefe kuma a daya. Ball bai buƙatar a sake ƙarfafa shi ba. Yi imani da tunaninku kuma ku sanya layuka masu launi, alal misali, kamar yadda a cikin zane na 2.
4. Haɗa bangarorin biyu daga asali. Don yin wannan, wuce ɗaya da sauran waya a cikin zigzag ta wurin tsaka-tsalle na kowane gefe. Ta hanyar takalma guda ɗaya ko biyu, sai a saka ɗayan ƙuƙwalwar wani nau'i, don haka ya zama kwari. A sakamakon haka, za ku samu kamar yadda yake a cikin Figure 3.
5. Daga gefen inda waya ta fito, dragon zai sami wuyansa. Zaka iya ƙara saƙa kamar layin daya, da biyu. Ƙara ƙarin layuka na beads don yin wuyansa ya fi dacewa (Figure 4). Haɗa sabon jerin tare da zigzag "matakai" na baya.

Jiki da wuya na dragon suna shirye!

Shugaban dragon mai girma uku

Babbar Jagora, yadda za a yi dragon damba:

1. Shugaban dragon ya rataye a cikin da'irar tare da wannan waya cewa jiki da wuyansa duka.
2. Ɗauki wasu nau'i biyu na nau'i daban daban da launi daga wasu. Zai zama idanu.
3. Fara satar zane bisa ga zane. Yana nuna a fili yadda tsari da kuma yadda za a ƙara beads. A tsakiyar zane, dots ja suna wakilci na karshe na wuyan dragon.
4. Sanya waya tare da beads.

Shugaban dragon ya shirya.

Mun gama da zane na dragon mai girma

Abin da ainihin dragon ba tare da scallop a kan kansa da kuma wutsiya?

Umurni yadda za a yi layi:

1. Ƙara yawan layuka na beads.
2. Hoto na 1 yana nuna yadda za'a kara jeri na farko na tseren. Yi shi don ƙwanƙwasa ya faɗi zuwa wuyan wuyansa, kuma kusa da hanci da jere ya zama ƙasa (Figure 2).

Umurni yadda za a yi wutsiya:

1. Ƙara jere na beads, haɗa shi da babban jiki a zigzag stitches. Tsaya lambar launi na beads.
2. Yi wasu layuka na beads, hankali rage lambar su. Yawan layuka ya dogara da tsawon wutsiya da kuke so (Figure 1).
3. Ƙarshen wutsiya za ta ƙunshi ɗaya ƙugiya.
4. Ƙara sifa biyu zuwa ƙarshen wutsiya (misali 2). Kayan aiki yana daidai da lokacin da ke zana lakabin kai.

Tsakanin dragon ya shirya! Idan ana so, zaka iya ƙara ƙaramin zobe a kan layi, wanda ya haɗa nauyin ƙwanƙwasa da kai. A gare shi, to, zaku iya haɗa haɗin a kan maɓalli ko sarkar.

Kashe dragon daga beads, ba tare da la'akari ko yana da dadi ko ɗaki ba, wani abu ne mai ban sha'awa, wanda zaka iya jawo hankalin yara.