Yadda za a karfafa da profile na siding? A nesa tsakanin profiles ga siding

Don samun daidai lebur surface facade cladding siding bukatar wani abin dogara da kuma m frame cewa zai iya tsayayya da nauyin taron da tsauri lodi. Daidai tattara akwaku da sauki fiye da a tsara a layi da tushe hawa surface. Its shigarwa da kuma datsa kammala abu dole ne a yi a yarda da dokoki a kan yadda za a karfafa da profile na siding.

Bugu da kari, a cikin karewa dukkan kokarin ji dimi gidan da kuma tabbatar da ciki samun iska daga cikin facade.

Yadda za a zabi littattafai na firam?

Jagoranci matsayinsa a tsakanin sauran kayan dauki galvanized profile for siding kafuwa, godiya ga halaye kamar:

• lalata da juriya;
• high ƙarfi.
• wuta juriya;
• 'yanci na sufuri da kuma kafuwa.
• sarrafa sauƙi da gudun kafuwa.
• low cost.
• babu tõzarta.
• karko.

Domin gawawwakin karkashin ta kuma yi amfani da itace, amma shi ba ci, don facades, kamar karfe, kamar yadda na ƙãre yi duk shekara zagaye ne hazo, iska da hasken rana.

Don qualitatively sheathe ganuwar, shi wajibi ne don shirya frame daidai. Don yin wannan daidai da tsayar da fasahar da zarar akwaku aikin uku ayyuka:

• jeri na katangu.
• riƙewa na rufi kuma cladding.
• tabbatar da samun iska daga cikin facade.

na'urorin haɗi siding

Ball U-dimbin yawa martaba don hawa siding sanya daga galvanized karfe tare girma 60h27h300 cm. Karfe takardar kauri kai 1 mm, wanda ya samar da high ƙarfi.

Saboda babban farashin da yawa amfani da bayanan martaba ga gypsum jirgin, wanda AMINCI ne m, amma siding tare da nauyin da rufi da suka tsaya a lokacin da amfani da hur cladding bangarori, kazalika da nema ƙarin riba jumpers.

Profile battens aka saka a cikin wani a tsaye matsayi lokacin da siding bangarori shirya horizontally. A nesa tsakanin profiles ga siding ne 40-60 cm.

Idan cladding bangarori an yi sa ne da wani nauyi abu, da tazara tsakanin uprights yanke zuwa 25 cm. A kusurwoyin dual sa profiles. A tsarin da yake a kan U-dimbin yawa marataya saka a kan wani kankare bango anka, da kuma itace - sukurori. Su yawan dogara a kan nesa tsakanin goyan baya da maki constituting 60-80 cm. Idan zaci gwaji tsauri lodi (iska), shi za a iya rage. Maimakon marataya za a iya amfani na gida wasan bidiyo sanya na profile guda. A frame kuma za a iya saka via zamiya baka, kuma Yanã shiryar.

A nesa tsakanin profiles ga siding cikin soket shirya horizontally, shi ne 46 cm (tsawo na bangarori). A frame karfafa da a tsaye ridges. Sau da yawa a karkashin hula ta amfani da wani karfe profile for siding, da mafi m da kuma resistant zuwa weathering.

Domin kayyade profiles ga suspensions amfani da gajeren karfe sukurori. rufi slabs ana gyarawa poppet dowels.

The karfe frame da aka kafa a matakai uku:

• Shirya katangu.
• alama surface na substrate.
• hawa profiles.

Kowane mataki ne mai muhimmanci saboda zane yana da babba nauyi da kuma iska load. Ba za ka iya skimp a kan kayan.

Shirya domin ado na ganuwar

1. Ƙirƙiri free sarari aiki a kusa da gidan da kuma yi scaffolding.
2. Ana cire obstructions: shutters, trims, gratings, downpipes, rassan shuke-shuke.
3. Restoration of sawa saman: maye flaking plaster, tsohon alluna, guda na masonry, sealing na fasa da kwakwalwan kwamfuta. Manyan fasa karfi kwa'di daga karfe profile.

rufi

Kowa iri rufi for ventilated facade ne ma'adinai ulu, kumfa kuma ecowool. A kumfa mai sauki shigar, yana da kyau fasaha halaye, amma yana da wani low ruwa tururi permeability kuma ba fiye da shekaru 15. Ma'adinai ulu dole ne za a dauka a cikin wani nau'i na Semi-m faranti, kamar yadda za a iya mirgine, slide a kan lokaci. Domin ecowool shi bukatar na musamman kayan aiki, da kuma shi ne bu mai kyau don amfani ga ciki rufi bushe ciki.

Rufi dage farawa a cikin hanyoyi uku.

1. Attaching da bango kafin installing da battens.
2. Stacking furring tsakanin posts.
3. Farko da na biyu da kafuwa bambance-bambancen, bayan wanda saman da aka yi perpendicular Dutsen gaba batten kwanciya tsakanin profiles tare da na gaba Layer na rufi. A tsari ne mafi tsada amma tasiri, tun da gidajen abinci tsakanin rufi faranti zoba topsheet.

Rufi riƙe bayanan martaba, adhesives ko roba fungi.

hawa frame

Daya daga cikin na kowa hanyoyi na hawa frame ne kamar haka.

1. Fastening suspensions amfani dowels ko sukurori. A daya m profile na bukatar a kalla uku fasteners. Manya da ƙananan goyon bayan da baya daga bangon struts 15-20 cm.
2. Taruwa, manya da ƙananan jagora na bayanin Mo 28h27. Yana da muhimmanci a shigar da su a kan wani matakin lebur. A daidai shigarwa na ƙananan profile na wuri dogara a kan siding. Daga makafi yankin da aka indented to 2-3 cm. Distance ƙaruwa zuwa heaving kasa. A karkashin m profile aka bayar a kan free bugun jini na 0.5 cm.
3. Da farko sanya hali tsayawar a sasanninta daga gidan. Domin wannan profile PP 60h27 ne biyu, ta haɗa tube a dama kusassari da sukurori.
4. The m profile aka yanke wa ake so tsawon da aka incremented ta haɗa lazimta da sukurori. Domin kada ya rasa ƙarfi da tsarin a cikin wadannan yankunan, tube an sanya tare da bi da bi canzawar mahadi daga sama da kuma kasa.
5. Tsaye sigogi aka saka a cikin shiriya da l ?? marataya, kwasfa wani "gashin baki" a garesu. Kafin kayyade su da sukurori aka sanya a cikin manya da ƙananan reluwe da matakin saitin, sa'an nan kuma Ya daidaita zuwa ga suspensions. Don hana squeaking karkashin iska lodi a kan frame a kowane karshen shigar roba liners.
6. Tare da kewaye dukkan takware suna trimmed. Idan dole, wani ƙarin tara saka mai gangara profiles. Don yin wannan, za ka iya nema cropping, don haka da fasahar ne sharar gida-free. A guntu guda je ga improvised marataya abin iko iri.
7. Cap ma kwasfa gidan siding. Domin tari tushe Zabirko shi aikin da aiki na rufe hula. A nesa tsakanin kwance profiles aka zaba a size ta webs da rata - na rufi kauri. A karkashin tsaye gidajen abinci na siding abubuwa suna sanya na tsaye giciye profile.

Ana kirga yawan facings

Kafin ka acikin sarƙa da profile zuwa siding, dole ne ka ƙayyade yawan sama. Lasafta farko plating yankin. Domin wannan ɓangare na gidan kasu kashi sauki lissafi siffofi da kuma kara zuwa Naira Miliyan 10%.

Girma da kuma hanyoyin bangarori mahadi

A lokacin da zabi wani roba ko acrylic profile for siding, masu girma dabam ne a cikin kewayon:

• tsawon - 2.5 - 4 m.
• Nisa - 20 - 30 cm.
• takardar kauri - 1 - 1.2 mm.

Bambanta daban-daban siffa profiles ga siding (photo kasa): herringbone, jirgin hukumar (mashaya), block-gidan (rajistan ayyukan).

Domin yankan siding bukatar jigsaw, hacksaw, wuka, a Bulgaria da wani sabon Disc.

A bangarori ne juna ko overlapping kulle. Wannan ne yake aikata a hankali, yin wani kokarin, muddin manya da ƙananan fastener abubuwa ba su zo tare. A fili ya zama free ba tare da tashin hankali. In ba haka ba, da bangarori za a iya lankwasa a nakasawa zazzabi. Hana take hakki na horizontality, wanda rage bayyanar da facade.

Girkawar profiles ga siding

1. M ƙananan matakin. Don yin wannan kewayen kewaye da ginin gudanar da kasa line (makafi wuri sama da matakin na 3-4 cm).
2. Saita fara profile ga siding a alama matakin da kuma kulla tare da sukurori. Tsakanin ta I.S. rata ne ya bar su a 6 mm.
3. External da ciki kusurwa abubuwa saka kasa da fara baki slats 6 mm. A saman hagu wuri domin shigarwa na soffit - kasa bangarori don rufe gable na rufin kuma eaves. Kusurwa daki-daki, dole ne rataya yardar kaina a kan fastener. Kai-tapping sukurori ana ci da gumi a increments na 20-40 cm. Shiga sassa na kusurwa guda sanya na 2 cm zoba. A saboda wannan dalili, ya ga kashe ciki na hagu gaban kuma daki-daki.
4. Ta takware aka yi kamar haka:
   a) kwanciya a waterproofing aprons.
   b) kayyade casings ko J-profiles.
   c) a fili profiles.
5. A farko facade panel aka saka a cikin kusurwa da kuma a cikin lokacin da na fara profile ga siding. Tsari ga thermal fadada indentation a dumi weather ne 6 mm, da kuma a cikin sanyi - 9 mm. Capacity a gidajen abinci da aka yi via zoba ko H-profiles. Sauran siding saka kamar wancan. A dangane da aka yi daga ciki zuwa waje.
6. A karshe panel ya kamata a saka kawai a lokacin da aka shigar karewa profiles ga siding. Ya kama da wani Starter, kawai da ɗan sirara. A karshen shigarwa na bukatar yankan karshe panel. Tube an yanke ma a lokacin shigarwa karkashin windows.

Hawa ta gable

Ta gable yi, kazalika da} arfafa profile for siding. Gable kewaye da aka kwasfa ko fara profile for ciki sasanninta. A bangarori suna gyarawa kamar wancan walling. Daya kawai kashi ne yanke a wani kwana da aka saka a cikin kulle na karɓa a profile. Yana kuma samar da fasaha gibba na 6 mm.

m alamu

1. Fasteners ci da gumi a cikin cibiyar rami a panel.
2. Tightening da fasteners dole ne m zuwa cladding ba warped lokacin da zafin jiki na nakasawa.
3. A bangarori suna gyarawa zuwa hagu zuwa dama yayin da rike mai tsananin kwance matsayi.
4. A lokacin da installing siding kamata bar fasaha gibba.
5. A bangarori kawai ta ramin. Nail ko dunƙule sukurori ta cikin siding abu ne ba a yarda.
6. Ta na katako gidaje kawai bayan shrinkage.
7. The jiki Properties na rufi dogara ne a kan wanda profile da ake amfani da siding. A zazzabi kasa -10 ⁰ C. roba siding hasarar ductility kuma iya crack.
8. Lokacin da installing da bangarori an sanya hannu sake, ba tare da tsangwama.
9. Fasteners da karfe sassa amfani a cikin plating a gida, dole ne a kiyaye da lalata. In ba haka ba, da abin da aka makala zai zama unreliable, kuma za a ta da tsatsa stains.
10. Wani lokaci siding bangarori suna gyarawa tsaye. Sa'an nan da akwaku domin su za a sanya horizontally.

ƙarshe

Yadda ya kamata kashe frame damar siding located in daya jirgin sama. Shigarwa na bangarori dole ne a za'ayi ba tare da tsangwama da kuma tare da fasaha gibba. Sai thermal nakasawa ba ya haifar da da murdiya.

M riko da umarnin a kan yadda za a karfafa da profile for siding da halittar ake bukata ƙarfi da halaye na kayayyakin amfani da damar da ingancin yi aiki da hannu.