Daidai kwanciya linoleum

Daya daga cikin gaskiya ma tabbatar da iri dabe - linoleum ne. A zamani kasuwar yayi dama ɗaukar hoto zažužžukan, kowanne daga abin da bukatar musamman Hanyar kwanciya takamaiman irin m, mastic.

Kwanciya linoleum zai wuce ba tare da wani matsaloli idan ka bi shawara da kuma shawarwari a cikin labarin.

Abin da yake da muhimmanci a san?

M rufe linoleum benaye ne wadannan yanayi:

• zazzabi a kasa matakin, dole ne su kasance a kasa 15 ° C.

• zafi na kankare bangarori for benaye tsakanin benaye ya kamata ba fiye da 4%.

• Domin ciminti - ba fiye da 5%.

• Domin plaster - ba fiye da 3%.

• tightening na chipboard - 12%, ba more.

Idan danshi abun ciki shi ne sama da kayyade sigogi, to, shi ne wata ila delamination linoleum a karkashin abin da matakai na iya faruwa rot da karaya da substrate.

Shigarwa da kuma share fage

1. kwanciya linoleum aka yi ne kawai bayan kammala duk gine-gine.

2. A ganuwar da partitions ya kamata a saka abubuwa zuwa amince da plinth. A cikin rashi an kafa toshe kwalaba daga cikin itacen da wadannan hanya: ya fadi na sukar soket 15 mm a diamita (ba kasa da) 40-45 mm a cikin zurfin. A nisa tsakanin kwasfan kamar 900-1200mm daga bene matakin 15 mm, na iya zama 20.

3. Lokacin da wani toshe kwalaba gidan ya toshe a cikin gida, suna yanka, dõmin su zarcewa guda jirgin sama tare da garun surface.

4. Bayan da subfloor gaba daya tsabtace, shi primed da ruwa, da watsawa adhesives da mastics. Za a iya amfani da wadanda jinsunan wanda dauke da bitumen, kwalta ko roba. Sa'an nan kuma aka narkar a fetur ko musamman kaushi.

5. Don amfani da share fage da kayan kama uniformity tare da manne da kuma mastic, tsara kawai ga linoleum. Priming da aka yi da abin nadi ko feshi. Direction ya zama tsananin zuwa ƙofar. Ba za mu iya ba da damar da samuwar puddles.

6. Kafin unroll a yi na linoleum, shi ya kamata ka rike a dakin da zazzabi (ba kasa da 15 °) game da 48 hours.

7. The yi ya kamata a shirya zuwa mirgine a kasa da kuma tsaya a cikin irin wannan hanya kwana biyu bace bumps, kuma undulations.

iri

Linoleum aka sanya a kan wani daban-daban akai:

• Bisa thermal rufi *

• Tare da nama **

• Na al'ada, ba tare da wani tamkar hanyar ***

Manne da mastic:

• Watsawa manne: bustilat, Adm-K, AK, gumilaks (ya shafi *).

• Bituminous mastic (zuwa **).

• bitumen-roba manne (ga **).

• Mastic, wanda hada da wani roba guduro kuma roba (for ***).

Yi amfani da spatula aiki ya kamata a zira kwallon TS-512A, a karfe spatula ba da shawarar ga kayan dogara ne a kan resins da kuma roba. A kauri daga cikin Layer amfani dole ne a millimeters:

• kan watsawa na game 0.7

• bitumen - 0.4

• Roba - 0.3 ko 0.4

• Roba guduro - 0.4

Domin adhesives da mastics a kan wani daban-daban akai, akwai lokaci daya aikace-aikace da kuma sizing:

• Watsawa - ana amfani da tushe daga cikin linoleum, kuma nan take ya sa shi.

• Wadanda cewa wani bangare ne na bitumen bayan aikace-aikace kamata jiƙa minti 20, bayan da a can ne salo.

• adhesives, tushen roba guduro, kuma yana da wata roba, da aka gudanar a volatilize da suka wuce haddi da sauran ƙarfi, to "yar ƙaramar ƙusa-free" yanayin. Sa'an nan a linoleum spatula № TS-695 m ne amfani a wani kauri daga 0.3 mm. A maimakon haka, za ka iya amfani da wani spatula paintbrush. Bayan 10 ko 15 minutes linoleum raya gefen gam ga subfloor.

connection bangarori

Lokacin da linoleum abu yanar gizo an shiga tare, wani wuce haddi da aka yanke gefuna amfani musamman wukake haka cewa a sashe yanka ta biyu webs a lokaci daya.

A gefuna da bangarori suna gam linoleum zuwa benen kasa tare da m stitching. Wadanda wuraren da sanya kau da scraps gam hanya daya.

waldi

Waldi a filin dubawa bangarori samar da zafi-da sanyi. Heat dabaru, Ina nufin infrared haskoki ko zafi iska, ana amfani da yafi a masana'antu.

Cold waldi ne yawanci amfani a cikin gida na tsawon bayan da aka sanya prirezka gidajen abinci. Cold waldi da ake amfani da linoleum a kan tushen da nama, ko ba shi da tushe. Cold waldi - ake ji wannan hanya zuwa gefuna abutting bangarori na musamman abun da ke ciki da cewa samar da m m ne kuma abin dogara connection.

phasing

1. bangarori na linoleum baya prirezajut baki. Sai suka himmantu ga matakin riga gam yankunan. Sa'an nan gam tare Weld Lines a kan biyu mai gefe m tef (fadin 100 mm).

2. trowel amfani mastic ko m a kan waɗanda rabo daga cikin ƙananan Layer, wanda aka kafa tsakanin kintinkiri da glued linoleum. Idan tef ba da hannu a cikin aiki, da m ko mastic ne amfani a kan dukan yankin na ƙananan Layer da gaba, na daga cikin kayan yanar gizo.

3. Daya ƙarshen lankwasa guda na linoleum da tabbaci kuma a hankali guga man da tushe bene. By karshen gefen wani bakin ciki Layer da abun da ke ciki da ake bukata domin sanyi waldi.

4. The biyu baki aka saukar da, aka guga man tam da ƙasa, kuma aka matsa tsakanin iyakar biyu abutting wani gefe. A tsari ne da za'ayi a lokaci guda. alamomin dole ne a gaba daya cika Weld abun da ke ciki.

5. Lokacin da aikin da aka kammala, da seams a hankali goge, cire duk da suka wuce haddi nauyi tare da linoleum. Cold waldi kabu samar da karfin da kusan unnoticeable.

A karshe mataki - da baseboards

Da zarar da zane da kuma gam gidajen abinci, an kafa plinth. Katako samu zuwa shambura, sanya a cikin ganuwar ko partitions kusoshi (diamita 2.5 mm, daga 30 zuwa 40 mm a tsawon). Za a iya amfani maimakon kusoshi sukurori a diamita 3 mm, ba kasa da 25 mm a tsawon. Saita wasu lokaci zuwa baseboards kawai shãfe kasa, amma sun kasance bã su gudanar tam shi. Domin PVC moldings amfani KH 2 m ko -3, suna gam ga ganuwar ko da partitions a kan wani m bar kõwa surface.

Muna fatan cewa sabon shafi da taimako daga wadannan umarnin, shi da aka samu da sauri, ya yi aiki na dogon lokaci da kuma ya zama da girman kai ga Mai Runduna!