Idan squeaks laminate, abin da ya yi? Indiscriminately tsara don magance matsalar?

Laminate dabe da aka dauki daya daga cikin mafi kyau kayan daga duk nufi ga benaye. Ga alama irin ɗaukar hoto ne sosai ban sha'awa da kuma manya, da kuma hidima a matsayin dogon. By pluses hada laminate ciki har da sauƙi na shigarwa. Sau da yawa, masu Apartments da kuma garin gidaje harhada wannan abu, ko da hannunsa.

Yawanci, bayan da kafuwa ne babu matsala tare da laminate ba ya faruwa. Duk da haka, shi wani lokacin da ya faru, kuma dõmin wannan shafi fara amo irin na jemage. Abin da, sa'an nan, na iya zama cikin hanyar wannan matsala da kuma yadda shi ne mafi sauki ga kashe? A labarin da ci gaba da kuma yarjejeniyar da tambaya dalilin da ya sa creaks laminate. Abin da ya yi (ba tare da bincike da kuma tare da bincike na da shafi) a cikin wannan hali, za ka koyi dukan cikakken bayani game da labarin.

Babban dalilin da matsala

Laminate - littattafai, da rashin alheri, quite cranky. Ɗaukar hoto na wannan nau'in na iya karya a kan bene ba tare da haddasa wasu matsaloli ga masu, shekaru da dama. Kuma za a iya bayyana kanta a cikin 'yan kwanaki bayan kwanciya. Idan tafiya a kan bene allon fara buga m sauti da fari, ba shakka, ya kamata a gano dalilin da ya sa creaks laminate. Abin da indiscriminately ko da bincike na da shafi a cikin wannan hali? Amsar wannan tambaya dogara a kan kawai abin da daidai ne dalilin wannan m sabon abu.

Creak laminate dabe a cikin dakin iya zama saboda:

• Take hakkin da tattalinsu a shiri na tushe fasahar.
• ma lokacin farin ciki ko bakin ciki substrate.
• rashin zazzabi rata tsakanin shafi kuma katangu.
• matalauta ingancin littattafai da kanta.
• Tsufa subfloor.

Take hakkin shiri fasahar tushe

Yana yakan faru ne cewa cikin dakin kawai a wuri guda creaks laminate. Abin da ya yi ba tare da bincike ko bincike na shafi a cikin wannan harka - don magana game da wannan kadan daga baya. Na farko, gano abin da dalilin iya zama kamar irin wannan amo irin na jemage. Bayyanar da m sauti a wuri guda sau da yawa yana nufin cewa a lokacin da installing da murfin da aka ba mutunta fasahar horo tushe.

Kafin kwanciya laminate subfloor dole tsara a layi. Kamar wancan amfani ko sumunti turmi ko musamman mix. Lahani a cikin ƙasa a ƙarƙashin laminate ba zai iya barin. Idan ka taka a cikin sama slat da rami a cikin m bene, shi ne kadan sag. A sakamakon haka, da kayan aiki hadin gwiwa abubuwa za ta motsa zumunta da juna. Kuma, kamar yadda wani sakamako, za ka ji da creaking. The matakan a cikin wannan hali ya kamata a dauka nan da nan. In ba haka ba, bayan dan lokaci da kayan aiki hadin gwiwa za su zama na banza kuma sosai m rata bayyana a kan murfin.

Kamar yadda kullum masu hada tushe

Zai ze cewa domin ya rabu da creaking, tasowa daga keta shiri aikin fasahar, dole a cire kawai 'yan slats, kawar da data kasance lahani a abu da kuma kafa a wuri. Amma a aikace, da rashin alheri, shi ne ba don haka sauki. Gaskiyar ita ce, da kau da katakai ba a gefen shafi, kuma ba zai iya zama kai tsaye a kan ta yanki. A dalilin ne da farko tsara fasali slats kansu. Saboda haka, ko a daya kawai wurin rufe yawanci suna zuwa rarraba kusan gaba ɗaya (daga garun zuwa mafi matsala na hukumar) tare da bayyanar m sautuna.

Creaks laminate: abin da ya yi da kuma yadda za a magance matsalar indiscriminately rufe

Dismantling na kasa - wani aiki a zahiri quite wuya da kuma m. Gaskiyar cewa laminates (da kuma musamman tsarin Kulle) sosai rauni kwa'di. Kuma saboda haka, yin disassembly ba tare da asarar kaya ba zai iya zama kusan ba.

Wannan shi ne dalilin da ya sa masu apartments da kuma gidaje yakan faru kusan tsoro idan creaks laminate. "Abin da indiscriminately rufe?" - wannan tambaya fara mamaki kusan duk masu dukiya. Duk da haka dai, a cikin na musamman forums za a iya ji quite sau da yawa. Kuma amsar ne, ba shakka, babu shi.

To yaya za ka kauce wa ba dole ba ta halin kaka idan creaks laminate? Abin da indiscriminately (unevenness har yanzu suna da kawar ba kawai a ko'ina, kuma a karkashin katakai) ɗaukar hoto? Sai dai itace cewa ya rabu da mu da amo irin na jemage a wuri guda laminate dabe iya zama tare da kawai PVA manne da kuma babban likita sirinji.

Matsalar da yin amfani da pre-board rawar soja rami da aka fadi na sukar. Next zuwa gare shi da sirinji allura manne. Da zarar substrate aka impregnated da PVA da protrudes zahiri daga cikin rami, da aiki da aka kare.

A hakowa shafi

Saboda haka, matsalar da kwamitin bukatar rawar soja a rami da kuma cika shi da manne a cikin akwati creaks laminate. Abin da indiscriminately ɗaukar hoto da kuma yadda za a gyara matsalar da m filaye don haka muna samu. Yanzu bari mu dauki wani kusa look to yadda za a yi wannan hanya a kan dukan dokokin. Bari mu fara da cewa gano abin da fasahar akwai hakowa ramuka a cikin laminate.

Abin takaici, shi yakan faru ne cewa a lokacin da wannan alama sosai sauki aiki, a kan jirgin akwai manyan da mummuna bagure, wanda rufe fuska kara rikitarwa. Ko da kwamitin kawai crack. Domin kauce wa irin wannan matsala kafin ka fara hakowa, ya kamata ka kula da zabar da dama da kayan aiki. Wato, da rawar soja dole ne a yadda ya kamata sanye take. Domin laminate, kazalika ga itace, ne mafi kyau dace karkace drills sanya na taurare karfe. Haka kuma, daya ya kamata ba zaɓi wani misali bambance-bambancen daga gare tare da wani kwana na 118 °, kuma mafi m. In ba haka ba, a lokacin rawar soja shakka farawa zuwa Amar zuwa gefe, da kuma a cikin wannan yanayin da hadarin chipping ko fatattaka ne ƙwarai karu.

A rami da aka rufe

A ci gaba kaifi rawar soja rami na sirinji a gaba mataki a cikin PVA manne matse idan creaks laminate. Abin da ya yi da kuma yadda za a gyara indiscriminately rufe wannan matsala, don haka shi ne bayyananne. Duk da haka, bayan da irin wannan hanya ne ba ma wuya ga Runduna Apartment akwai wani istinbadi tambaya: "Yadda za a rufe fuska da ya fadi na sukar wani rami a kasa?" Wannan za a iya yi ta amfani da:

• putty ko sealant.
• musamman kakin fensir .
• epoxy guduro.
• kai-m film.
• mastic.

A karshe mataki tare da wani laminate to m tsabta zane don cire ragi masking abu da kuma a hankali bi da gyara rabo nazhdachkoy m. Sa'an nan, wani ɓangare na jirgin da rufaffiyar rami za a goge tare da zane murfin kuma daya Layer na wani colorless matt varnish.

A creak na da yawan zafin jiki rata

Saboda haka, da muka samu, idan kawai a wuri guda creaks laminate cewa yin indiscriminately. Sanadin m sauti, duk da haka, na iya zama ba kawai don tafka magudi a cikin substrate. Wani lokaci akwai wani creaking a wuri guda murfin kuma daga yankin. Akwai matsala mafi yawan masu apartments da kuma gidaje kawai saboda gaskiyar cewa a lokacin da kwanciya laminate aka bar ma kunkuntar rata tsakanin karshen allon da katangu.

A shafi na wannan nau'in, kazalika da itace, da hawa da sauka a cikin dakin da zazzabi ko zafi iya fadada ko kwangila. Saboda haka, a lokacin da kwanciya da kewaye garun da laminate da kuma shirya wani kananan rata. Its nisa dogara a kan bene sarari. Idan da rata ne ma kananan, da fadada danniya auku a thicker shafi. A sakamakon haka, makullansu da abubuwa fara latsa da juna, da kuma cewa yana sa squeaking.

Gyara da matsala a wannan yanayin ne ma quite sauki. Don yin wannan, cire duk baseboards. Kara kanta zahiri fadada gibin da ake so nisa ta amfani da grinder. Hakika, yin wannan aikin kana bukatar gyara.

Yadda za a yanka da shafi

Next, bari mu dauki wani kusa look a lokaci guda, abin da idan saboda arancinsu m zazzabi rata creaks laminate. Abin da indiscriminately (sawing matsalar da aka warware ta "karin" rabo allon) - a cikin wannan harka shi ne bayyananne. Amma yadda za a rage ɗaukar hoto yanki da dama santimita kuma ba ya ganimar da jirgin?

Laminate - wani abu hada da dama yadudduka. Saboda haka grinder kamata sa Disc da matsakaicin m sabon tsarin. A wannan yanayin da sawa yanke layin da aka sosai m.

A maimakon haka, za ka iya amfani da grinders, kuma jigsaws. Domin da wannan kayan aiki, ba shakka, kuma bukatar samun 'yancin sawa ruwa. In ba haka ba, yanke samun bai kula da tufafinsa. A wannan yanayin, shi za a iya amfani da wani kunkuntar karfe ƙusa fayil da lafiya hakori tsefe, da kuma musamman tsara musamman domin aiki tare da laminate.

Kawar da sauran Sanadin squeaking

Saboda haka, yanzu ka san idan creaks laminate cewa yin indiscriminately (substrate unevenness za a iya shafe ta da PVA manne, da kuma zafin jiki da rata fadada yin amfani da grinders) shafi. Amma, ba shakka, da m sauti iya faruwa ba wai kawai saboda keta da fasaha na shirye-shiryen da subfloor, ko ajiye kansu allon. A dalilan da wannan sabon abu sau da yawa: matalauta ingancin laminate substrate kuskure dace ko tsufa subfloor.

A duk wadannan lokuta ba tare da lalata da murfin, ba shakka, za su yi nasara ba. Poor ingancin ko bai dace ba laminate substrate za su canza. Idan hanyar da amo irin na jemage ne tsufa na ƙãre kasa, za ka bukatar ka yi karin hadaddun ayyukan. A wannan yanayin, shi ne zama dole ba ne kawai don cire laminate, amma kuma ya rarraba da leveling screed. Squeaks a subfloor bayyana yafi saboda da tashi allon daga log. Saboda haka, ya rabu da mu m sauti, za su bukatar buga kusoshi ko sukurori l ?? tam.